0Cr23Al5 780Mpa Teasachadh FeCrAl Alloy an-aghaidh creimeadh
Tha an fheart aig alloy FeCrAl de fhrith-sheasmhachd àrd, co-èifeachd an aghaidh teòthachd ìosal, teòthachd obrachaidh àrd, deagh fhrith-oxidation agus an-aghaidh creimeadh fo theodhachd àrd.
Tha e air a chleachdadh gu farsaing ann an fùirneis gnìomhachais, innealan taighe, fùirneis gnìomhachas, Meatailteachd, innealan, itealain, càraichean, armachd agus gnìomhachasan eile a’ toirt a-mach eileamaidean teasachaidh agus eileamaidean dìon.
| Ìre | 0Cr23Al5 |
| Meud | 1.2-10mm |
| Uachdar | searbh air a nighe / soilleir / oxidized / gorm |
| Cuideam | 25-30kg / rolla |
| Resistivity | 1.35±0.06μΩ.m |
| An teòthachd as àirde | 1300 ℃ |
| Dùmhlachd | 7.25g / cm³ |
| Neart tensile | ≥600N/mm² |
| Leudachadh | ≥12% |
| Ìre | An teòthachd as àirde | Resistivity | Puing leaghaidh | Neart tensile | Leudachadh |
| 0Cr21Al4 | 1100 ℃ | 1.23±0.06μΩ.m | 1500 ℃ | 750 | ≥12 |
| 0Cr25Al5 | 1250 ℃ | 1.42±0.07μΩ.m | 1500 ℃ | 750 | ≥12 |
| 0Cr23Al5 | 1300 ℃ | 1.35±0.06μΩ.m | 1500 ℃ | 600 | ≥12 |
| 0Cr21Al6NbCo | 1350 ℃ | 1.43±0.07μΩ.m | 1510 ℃ | 750 | ≥12 |
| 0Cr27Al7Mo2 | 1400 ℃ | 1.53±0.07μΩ.m | 1520 ℃ | 750 | ≥10 |
| KSC | 1350 ℃ | 1.44±0.05μΩ.m | 1510 ℃ | 750 | ≥16 |
| Cr20Ni80 | 1200 ℃ | 1.09±0.05μΩ.m | 1400 ℃ | 750 | ≥20 |
| Cr15Ni60 | 1150 ℃ | 1.12±0.05μΩ.m | 1390 ℃ | 750 | ≥20 |
| Cr20Ni35 | 1100 ℃ | 1.04±0.05μΩ.m | 1390 ℃ | 750 | ≥20 |
| Cr20Ni30 | 1100 ℃ | 1.04±0.05μΩ.m | 1390 ℃ | 750 | ≥20 |
Ar buannachd: Àrd chàileachd, goirid lìbhrigeadh ùine, beag MOQ.
Feartan: Coileanadh seasmhach;Anti-oxidation;Frith-chreimeadh;Seasmhachd teòthachd àrd;Comas cruthachadh coil sàr-mhath;Suidheachadh uachdar èideadh agus breagha gun spotan.
Cleachdadh: Eileamaidean teasachaidh an aghaidh; Stuth ann am Meatailteachd; Innealan taighe; Dèanamh meacanaigeach agus gnìomhachasan eile.
Prìomh sheilbh uèir teasachaidh FeCrAl Resistance Electric
Meud raon:
Uèir: 0.018mm-10mm
Slat: 8mm-50mm
Ribbon: 0.05*0.2mm-2.0*6.0mm
Stiall: 0.5*5.0mm-5.0*250mm
| Stuth alloy | Co-dhèanamh ceimigeach % | |||||||||
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | cuid eile | |
| max(≤) | ||||||||||
| 1Cr13al4 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 12.5-15.0 | - | 3.5-4.5 | An còrr | - |
| 0Cr15Al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | - | 4.5-5.3 | An còrr | - |
| 0Cr25Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 23.0-26.0 | ≤0.60 | 4.5-6.5 | An còrr | - |
| 0Cr23Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 20.5-23.5 | ≤0.60 | 4.2-5.3 | An còrr | - |
| 0Cr21Al6 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 19.0-22.0 | ≤0.60 | 5.0-7.0 | An còrr | - |
| 1Cr20Al3 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 18.0-21.0 | ≤0.60 | 3.0-4.2 | An còrr | - |
| 0Cr21Al6Nb | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.60 | 21.0-23.0 | ≤0.60 | 5.0-7.0 | An còrr | Nb cuir 0.5 |
| 0Cr27Al7Mo2 | 0.05 | 0.025 | 0.025 | 0.2 | ≤0.40 | 26.5-27.8 | ≤0.60 | 6.0-7.0 | An còrr | |
Sreath toraidh eile:
Alloy FeCrAl:OCr15Al5,1Cr13Al4, 0Cr21Al4, 0Cr19Al3, 0Cr21Al6, 0Cr25Al5, 0Cr21Al6Nb,0Cr27Al7Mo2.
Alloy NiCr: Cr20Ni80,Cr30Ni70,Cr20Ni35,Cr20Ni30,Cr15Ni60.
CuNi Alloy:NC003, NC010, NC012, NC015, NC020, NC025, NC030, NC040, NC050, Constantan, 6J8/11/12/13/.
Uèir tàthaidh:ERNiCrMo-3/4/13, ERNiCrFe-3/7, ERNiCr-3/7, ERNiCr-7, ERNi-1, ER70S-6.
Thermocouple alloy:K, J, E, T, N, S, R, B, KX, JX, EX, TX, NX.
Inconel alloy:Inconel 600,601,617,X-750,625,690,718,825.
Incoloy alloy:Incoloy 800,800H,800HT,825,925.
Hastelloy alloy:HC-276, C-22, C-4, HB, B/2/3, X, N.
Monel Alloy:Monel 400,K500.
Àrd-teòthachd alloy:A-286, Nimonic80A/90,GH131,GH1140,GH36,GH2706,GH2901,GH3625,GH3536,GH4169.
Sreath mionaideach alloy:1J33,3J01,3J9,4J29,4J32.4J33,Invar36,4J45.FeNi50.
alloy spraeadh teirmeach:Inconel 625, Ni95Al5, Monel400,45CT, HC-276, K500, Cr20Ni80.
