SWG16 0Cr21Al4 / 0Cr19Al3 uèir teasachaidh alloy fecral airson ath-tharraing
SWG16 0Cr21Al4 / 0Cr19Al3 uèir teasachaidh alloy fecral airson ath-tharraing
Resistance Uèir air a dhèanamh de Nickel Chrome Alloys, Nickel Chrome Iron Alloys, Iron Chrome Aluminium Alloys, Copper Nickel Alloys.
Air a chleachdadh sa mhòr-chuid ann an teasadair, eileamaid teasachaidh agus resistor, msaa.
NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20
crAl 15-5, crAl 20-5, crAl 25-5, msaa…
Constantan, Alloy 30, Alloy 60, Alloy 90, msaa.
Seasmhachd dealain bho 0.02 u ohm/m-1.53 u ohm/m
Teòthachd obrachaidh bho 200 C gu 1400 C
Bidh Pls saor fios a chuir thugainn ma tha ceist sam bith ann.
NiCr:
RESISTOHM 20, RESISTOHM 30, RESISTOHM 40, RESISTOHM 60, RESISTOHM 70, RESISTOHM 80
FeCrAl:
RESISTOHM 125, RESISTOHM 135, RESISTOHM 140,
RESISTOHM 145, RESISTOHM 153
CuNi
Constantan, Cuprothal 5, Cuprothal 10, Cuprothal 15, Cuprothal 30, Eurica
| Ìre Alloy FeCrAl | co-dhèanamh ceimigeach % | |||||||||
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | Re | cuid eile |
| as àirde (≤) | ||||||||||
| 1Cr13al4 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 12.5-15.0 | -- | 3.5-4.5 | 0.1 | Bal. |
| 0Cr15Al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | -- | 4.5-5.3 | 0.1 | Bal. |
| 0Cr25Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 23.0-26.0 | ≤0.60 | 4.5-6.5 | 0.1 | Bal. |
| 0Cr23Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 20.5-23.5 | ≤0.60 | 4.2-5.3 | 0.1 | Bal. |
| 0Cr21Al6 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 19.0-22.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr21Al4 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 21.0-23.0 | ≤0.60 | 3.0-5.2 | 0.1 | Bal. |
| 0Cr21Al6Nb | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.60 | 21.0-23.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr27Al7Mo2 | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.40 | 26.5-27.8 | ≤0.60 | 6.0-7.0 | 0.1 | Bal. |
Co-dhèanamh ceimigeach agus feartan:
| Feartan / Ìre | NiCr 80/20 | NiCr 70/30 | NiCr 60/15 | NiCr 35/20 | NiCr 30/20 | |
| Prìomh chumadh ceimigeach (%) | Ni | Bal. | Bal. | 55.0-61.0 | 34.0-37.0 | 30.0-34.0 |
| Cr | 20.0-23.0 | 28.0-31.0 | 15.0-18.0 | 18.0-21.0 | 18.0-21.0 | |
| Fe | ≤ 1.0 | ≤ 1.0 | Bal. | Bal. | Bal. | |
| Teòthachd obrach as àirde (ºC) | 1200 | 1250 | 1150 | 1100 | 1100 | |
| Resistivity aig 20ºC (μ Ω · m) | 1.09 | 1.18 | 1.12 | 1.04 | 1.04 | |
| Dlùths (g/cm3) | 8.4 | 8.1 | 8.2 | 7.9 | 7.9 | |
| Giùlan teirmeach (KJ/m · h · ºC) | 60.3 | 45.2 | 45.2 | 43.8 | 43.8 | |
| Co-èifeachd leudachadh teirmeach (α × 10-6 / ºC) | 18 | 17 | 17 | 19 | 19 | |
| Rubha leaghaidh (ºC) | 1400 | 1380 | 1390 | 1390 | 1390 | |
| Leudachadh (%) | >20 | >20 | >20 | >20 | >20 | |
| Structar micrografach | austenite | austenite | austenite | austenite | austenite | |
| Seilbh Magnetic | neo-mhaireannach | neo-mhaireannach | neo-mhaireannach | neo-mhaireannach | neo-mhaireannach | |
| Ìre CuNi Alloys | Frith-aghaidh dealain (20 ceum mm² /m) | teòthachd coefficient an aghaidh (10^6/ceum) | Dùmhlachd g/mm² | Max. teòthachd (ceum) | Puing leaghaidh (ceum) |
| CuNi1 | 0.03 | <1000 | 8.9 | 200 | 1085 |
| CuNi2 | 0.05 | <1200 | 8.9 | 200 | 1090 |
| CuNi6 | 0.10 | <600 | 8.9 | 220 | 1095 |
| CuNi8 | 0.12 | <570 | 8.9 | 250 | 1097 |
| CuNi10 | 0.15 | <500 | 8.9 | 250 | 1100 |
| CuNi14 | 0.20 | <380 | 8.9 | 300 | 1115 |
| CuNi19 | 0.25 | <250 | 8.9 | 300 | 1135 |
| CuNi22 | 0.30 | <160 | 8.9 | 300 | 1150 |
| CuNi30 | 0.35 | <100 | 8.9 | 350 | 1170 |
| CuNi34 | 0.40 | -0 | 8.9 | 350 | 1180 |
| CuNi 40 | 0.48 | ± 40 | 8.9 | 400 | 1280 |
| CuNi44 | 0.50 | <-6 | 8.9 | 400 | 1280 |
Roinnean-seòrsa bathar
-
Àrd càileachd an aghaidh 123 fecral uèir 0cr21a ...
-
Dia 0.04mm 0Cr15Al5 Fecral 750 alloy Uèir airson F ...
-
0.07mm 0cr25al5 Teasachadh an aghaidh Dealain Fec ...
-
uèirichean kanth-al fecral alloy soilleir no oxidation
-
Uèir Alùmanum Iarainn Chrome (CrAl 25-5) 0.5mm le ...
-
FeCrAl alloy 0Cr27Al7Mo2 Cral teòthachd àrd ...